Disc Ø 8.0 x 8.0 mm N35SH Nickel Neodymium Magnet

Model Number: N35SH NI 
Type: Permanent  Composite: NdFeB Magnet  Shape: magnet segment 
Application: Industrial Magnet  working temperature: 80 deg celsius  Application: de motor, servo motor, medical etc 
Coating: Nickle  SIZE: R195*46MM 

Wide range of Grades available- from N35 to N52;
Density: 7.4 -7.6 g/ cm3;
Hardness: 600 {Hv};.
•Neodymium magnets are the most powerful commercially produced magnets.
•NdFeB magnets have a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes up to 50 MGOe.
•NdFeB magnets can replace SmCo magnets in most cases, especially where operating temperature is less than 80 degrees Centigrade.
•Very high strength.
•Relatively low cost.
•Compared to Alnico and SmCo magnets, relatively easy to machine.
Quick Leads
•Manufacturing process - sintering (most common), injection molding, and compression bonding.
•Shapes available - blocks, bars, discs, rings, cylinders, arc segments, or irregular shapes, etc.
•Wide range of Grades available- from about 3330 to 5311. (First 2 digits represent BH.max, and second two digits represent Intrinsic Coercivity, Hci.)
•Density: 7.4 -7.6 g/ cm3; Hardness: 600 {Hv}
•Some particular grades  can achieve 200°c the max working temperature.
•Saturation magnetizing field required - about 35kOe
•Machining - Neodymium magnets should be machined by grinding using diamond wheels, however, of the hard magnet materials, Neo magnets are the least difficult to machine. We can

successfully machine very small magnets.